Overview of PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings
Material: PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings is made from pure copper, which is a reddish-orange, malleable, and ductile metal. The most common types used for piping are Type K, Type L, and Type M, with varying thicknesses and applications.
Sizes: Copper pipes come in various diameters, typically ranging from 1/8″ to 4″ for residential and light commercial use. Sizes are denoted by their nominal diameter, not the actual inside diameter.
Applications: Copper is suitable for both water supply lines and gas lines (Type L or Type K). It’s also used in refrigeration systems, HVAC, and for conveying other fluids where corrosion resistance is crucial.
Features of PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings
-
Corrosion Resistance: Copper naturally resists corrosion and the formation of rust, making it ideal for water supply systems where purity is essential.
-
Heat Conductivity: Copper is an excellent conductor of heat, which is beneficial in heating systems and hot water distribution, allowing for efficient energy transfer.
-
Longevity: Copper pipes can last for decades, even up to 50 years or more with proper installation and maintenance.
-
Non-toxicity: Copper is safe for potable water systems as it does not contaminate the water.
-
Ease of Installation: Copper pipes can be easily cut, bent, and joined using soldering, compression fittings, or flare fittings, although soldering is the most common method for permanent connections.
-
Flexibility: While rigid, copper pipes can be bent to a certain degree without kinking, especially softer types like Type M.
(PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings)
Parameters of PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings
A PL 90-degree hydraulic elbow bite-type tube fitting for compression copper pipe fittings typically refers to a specific type of connector used in plumbing and fluid transmission systems, particularly in the context of copper pipes. Here are some key parameters for this type of fitting:
1. Material: Copper – The fitting is usually made of high-quality copper, which is known for its durability, corrosion resistance, and thermal conductivity.
2. Angle: 90 degrees – The elbow allows a pipe to change direction by 90 degrees without changing the flow path.
3. Bite Type: Compression Fit – This means the fitting uses an interference fit method, where the pipe is compressed (slightly deformed) inside the fitting’s socket, creating a secure seal without using threaded connections.
4. Size Compatibility: Standard Pipe Sizes – Available in various sizes to match standard copper pipe OD (Outside Diameter) and ID (Inside Diameter) measurements, such as 1/2″, 3/4″, 1″, 1-1/2″, etc.
5. Pressure Rating: Depending on the manufacturer, it will have a specific pressure rating (PSI or Bar) that determines the maximum water or fluid pressure it can withstand before failure.
6. Finish: Common finishes include uncoated, oiled, or chromed for improved aesthetics and corrosion resistance.
7. Connection Type: Solderable or Non-Solderable – Some may be suitable for soldering, while others are designed for use with compression pipe tools or push-to-connect methods.
8. Threadless Design: Since it’s a compression fitting, there are no threads involved, making installation easier and faster compared to traditional threaded fittings.
9. Standards: May conform to industry standards like ASME B16.25, British BSPT, or other regional plumbing codes.
To find specific parameters for your desired fitting, you would need to consult the manufacturer’s specifications or refer to the product datasheet.
(PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings)
Company Profile
Copper Channel is a trusted global metal material supplier & manufacturer with over 12-year-experience in providing super high-quality copper products and relatives products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality copper materials and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings
Q: Is PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings better than PEX?
A: Both have advantages. Copper is more durable and resistant to UV rays, but PEX (cross-linked polyethylene) is cheaper, easier to install, and more flexible. The choice depends on factors like budget, installation complexity, and personal preference.
Q: How do you join PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings?
A: Copper pipes are commonly joined using soldering (also known as sweating), where a fitting is fitted onto the pipe ends and solder is applied to create a leak-proof seal. Compression and push-fit fittings are alternatives for easier, no-solder connections.
Q: Can PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings freeze and burst?
A: Like any pipe material, copper can freeze and potentially burst if the water inside freezes and expands. Proper insulation and maintaining temperatures above freezing are necessary to prevent this.
Q: Does PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings need to be grounded?
A: In most plumbing applications, copper pipes do not require grounding. However, for electrical grounding purposes, specific codes and standards may dictate when and how copper pipes can be used as part of an electrical grounding system.
Q: How to PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings before soldering?
A: Before soldering, copper pipes and fittings should be cleaned with a wire brush or emery cloth to remove any oxidation, dirt, or oils. Flux is then applied to ensure a good bond between the pipe and the fitting during the soldering process.
(PL 90 degree hydraulic elbow bite type tube fitting compression copper pipe fittings)
