Leaky copper pipes can be frustrating to fix, but they’re actually very easy to mend with just a few basic steps. Here’s how you can fix your own leaky pipe in no time.
(How To Repair A Leaky Copper Pipe)
Materials needed:
* A water source (if you don’t have one)
* A flathead screwdriver
* A wire nuts (optional)
Step 1: Disconnect from your water supply
First, make sure that the water source is turned off or unplugged from the power outlet. If it’s still plugged in, try or two wires.
Step 2: Open the pipe
Next, carefully open the old, black or red rubber coupling between the inner and outer cover of the pipe. This coupler is responsible for protecting the pipe from water damage.
Step 3: Remove the old coupling
Remove the old coupler from the old coupling by using a flathead screwdriver and gently pushing it out through the inner cover. Be careful not to push too far away from the wall, as this can damage the outer cover.
Step 4: Install new coupler
Once the old coupler is removed, use a wire nuts to secure the new coupler in place. Make sure to hold it firmly on the outside cover of the pipe while being careful not to pull it out too hard.
Step 5: Test the pipe
After the new coupler is installed, test the pipe to ensure that there’s no leaks in the old coupling or connections. Once you’ve done this, turn back on the water supply to see if the problem has been resolved.
(How To Repair A Leaky Copper Pipe)
In conclusion, repairing a leaky copper pipe is an easy process that requires minimal tools and patience. By following these steps, you should be able to fix your own leaky pipe within a few minutes. So why wait? Give it a try!
