Braze is a simple and effective method for attaching copper pipes without using metal clips or nuts. It is particularly useful for joining two pipes that are already connected together, such as a drain union or a showerhead.
(how to braze copper pipe)
Here are the steps to braze copper pipes:
1. First, ensure that both ends of the copper pipe are clean and dry. If there is moisture on the pipe, it can cause damage during braze and make the joint more prone to leaks.
2. Cut off the exposed ends of the copper pipe at a suitable depth, about half the length of the pipe. Be careful not to cut too deeply, as this can damage the copper.
3. Use a heat gun or a soldering iron to melt a small amount of flux onto the end of each pipe. This will help to create a strong bond between the two ends of the pipe.
4. Place one end of the copper pipe into the socket on the brass bar or adapter. Ensure that the end is fully inserted and that there is no air bubbles.
5. Place the other end of the copper pipe into the slot on the brass bar or adapter. Again, ensure that the end is fully inserted and that there is no air bubbles.
6. Use the heat gun or soldering iron to carefully metal clips or nuts have melted away. Be sure to hold the heat source steady while you work, as excess heat can cause the metal clips or nuts to crack or split.
7. Once the metal clips or nuts have melted away, use pliers to remove them from the pipe and clean any remaining flux residue.
8. Test the joined pipe to ensure that it is tight and secure. You can do this by pouring water over the pipe and checking if it flows smoothly.
(how to braze copper pipe)
In conclusion, braze is an effective method for joining without using metal clips or nuts. By following these simple steps, you can join two copper pipes together quickly and easily. Just be sure to take your time and pay attention to detail when working with hot objects like this, to avoid causing damage or accidents.
Inquiry us
