Overview of Straight Copper Tube
Material: Straight Copper Tube is made from pure copper, which is a reddish-orange, malleable, and ductile metal. The most common types used for piping are Type K, Type L, and Type M, with varying thicknesses and applications.
Sizes: Copper pipes come in various diameters, typically ranging from 1/8″ to 4″ for residential and light commercial use. Sizes are denoted by their nominal diameter, not the actual inside diameter.
Applications: Copper is suitable for both water supply lines and gas lines (Type L or Type K). It’s also used in refrigeration systems, HVAC, and for conveying other fluids where corrosion resistance is crucial.
Features of Straight Copper Tube
-
Corrosion Resistance: Copper naturally resists corrosion and the formation of rust, making it ideal for water supply systems where purity is essential.
-
Heat Conductivity: Copper is an excellent conductor of heat, which is beneficial in heating systems and hot water distribution, allowing for efficient energy transfer.
-
Longevity: Copper pipes can last for decades, even up to 50 years or more with proper installation and maintenance.
-
Non-toxicity: Copper is safe for potable water systems as it does not contaminate the water.
-
Ease of Installation: Copper pipes can be easily cut, bent, and joined using soldering, compression fittings, or flare fittings, although soldering is the most common method for permanent connections.
-
Flexibility: While rigid, copper pipes can be bent to a certain degree without kinking, especially softer types like Type M.
(Straight Copper Tube)
Parameters of Straight Copper Tube
The straight copper tube parameter refers to the value of the resistivity of a copper material that is measuring in degrees Celsius per kilogram of copper per second. This parameter is typically represented by the symbol Rk in the International System of Units (SI). The values for various parameters are given in units such as Ohm, Kp, Q, or Sps.
In general, the higher the value of the straight copper tube parameter, the better the resistance of the material being measured. This means that materials with lower resistances may be more difficult to cool and operate at high temperatures. However, this also suggests that the of the material can be used to optimize performance in certain applications.
One common application where the straight copper tube parameter is used is in electronic equipment. Materials with low resistance in the temperature range of around 40-60 degrees Celsius can be used to create small, lightweight components like transistors and heat sinks. These materials are easier to work with and require less cooling power compared to materials with higher resistance values.
Another application where the straight copper tube parameter is used is in precision. For example, in manufacturing precision tuning horns, a device called a resonator is used to capture and transmit the feedback signal generated by the piezoer. This feedback signal is then transmitted to the sensor that is designed to measure the frequency response of the horn.
Overall, the straight copper tube parameter provides important information about the resistance of a material being measured, which can be used to optimize performance and reduce energy consumption. It is an important consideration for a wide range of applications, including electronic equipment, precision, and other types of technologies.
(Straight Copper Tube)
Company Profile
Copper Channel is a trusted global metal material supplier & manufacturer with over 12-year-experience in providing super high-quality copper products and relatives products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality copper materials and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of Straight Copper Tube
Q: Is Straight Copper Tube better than PEX?
A: Both have advantages. Copper is more durable and resistant to UV rays, but PEX (cross-linked polyethylene) is cheaper, easier to install, and more flexible. The choice depends on factors like budget, installation complexity, and personal preference.
Q: How do you join Straight Copper Tube?
A: Copper pipes are commonly joined using soldering (also known as sweating), where a fitting is fitted onto the pipe ends and solder is applied to create a leak-proof seal. Compression and push-fit fittings are alternatives for easier, no-solder connections.
Q: Can Straight Copper Tube freeze and burst?
A: Like any pipe material, copper can freeze and potentially burst if the water inside freezes and expands. Proper insulation and maintaining temperatures above freezing are necessary to prevent this.
Q: Does Straight Copper Tube need to be grounded?
A: In most plumbing applications, copper pipes do not require grounding. However, for electrical grounding purposes, specific codes and standards may dictate when and how copper pipes can be used as part of an electrical grounding system.
Q: How to Straight Copper Tube before soldering?
A: Before soldering, copper pipes and fittings should be cleaned with a wire brush or emery cloth to remove any oxidation, dirt, or oils. Flux is then applied to ensure a good bond between the pipe and the fitting during the soldering process.
(Straight Copper Tube)
